NSN 5306-01-058-3320
Coaxial Connector
Between 1.057 inches and 1.087 inches fastener length, spline extended washer head style, between 0.240 inches and 0.260 inches head height, extended washer diameter: between 0.460 inches and 0.470 inches .
Manufacturer part number MS21297-04009 for national stock number 5306010583320.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-058-3320.
-
MPN or Model
MS21297-04009
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.485 inches and 0.535 inches -
Fastener Length
Between 1.057 inches and 1.087 inches -
Head Style
Spline extended washer -
Head Height
Between 0.240 inches and 0.260 inches -
Extended Washer Diameter
Between 0.460 inches and 0.470 inches -
Extended Washer Thickness
Between 0.026 inches and 0.046 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Head Minor Diameter
Between 0.235 inches and 0.250 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-025-6960 MPN ST3M714-4D11Close Tolerance Screw
- 5305-01-170-8493 MPN LD111-0044-0512Close Tolerance Screw
- 5305-01-465-2425 MPN 3M1169D4-10AFClose Tolerance Screw
- 5305-01-591-2238 MPN ST3M557-6-27Close Tolerance Screw
- 5305-01-604-8547 MPN 3M1277E4D8ALMachine Screw
- 5305-01-629-9065 MPN BACB30LU4-30Close Tolerance Screw
- 5306-00-654-8051 MPN BACB30CW10-34Machine Bolt
- 5306-00-828-4837 MPN 431736Machine Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-058-3320 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21297-04009 | Military Standards |
MS21297-04009 | Huck International, Inc. |
MS21297-04009 | Sps Technologies, Llc |
MS21297-04009 | Sps Technologies, Llc |
VFK101G4-009 | Valley-todeco, Inc. |
MS21297-04009 | Huck Intl Inc |