NSN 5306-01-058-3895
Coaxial Connector
Between 1.821 inches and 1.851 inches fastener length, spline extended washer head style, between 0.302 inches and 0.322 inches head height, extended washer diameter: between 0.575 inches and 0.585 inches .
Manufacturer part number MS21296-05019 for national stock number 5306010583895.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-058-3895.
-
MPN or Model
MS21296-05019
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.643 inches and 0.693 inches -
Fastener Length
Between 1.821 inches and 1.851 inches -
Head Style
Spline extended washer -
Head Height
Between 0.302 inches and 0.322 inches -
Extended Washer Diameter
Between 0.575 inches and 0.585 inches -
Extended Washer Thickness
Between 0.035 inches and 0.055 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Head Minor Diameter
Between 0.360 inches and 0.375 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 1.158 inches and 1.178 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
51.0 rockwell c and 54.0 rockwell c -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-007-6218 MPN A1C617-23Externally Relieved Body Screw
- 5305-01-012-2012 MPN AIC812-04-12Machine Screw
- 5305-01-095-5708 MPN AIC870-4-10Socket Head Cap Screw
- 5305-01-135-4125 MPN 3M933-4-11Machine Screw
- 5305-01-150-8725 MPN AIC811-02-2Socket Head Cap Screw
- 5305-01-158-5368 MPN SC2671-06-6Machine Screw
- 5305-01-187-5958 MPN BACB30LH4-3Close Tolerance Screw
- 5305-01-211-7485 MPN AIC4040-3-02RClose Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-058-3895 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21296-05019 | Sps Technologies, Llc |
MS21296-05019 | National Aerospace Standards |
MS21296-05019 | Huck International, Inc. |
MS21296-05019 | Military Standards |
MS21296-05019 | Huck Intl Inc |