NSN 5306-01-058-7047
Coaxial Connector
Between 1.016 inches and 1.046 inches fastener length, dished hexagon head style, between 0.156 inches and 0.171 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number NAS6705HU9 for national stock number 5306010587047.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-058-7047.
-
MPN or Model
NAS6705HU9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.444 inches and 0.494 inches -
Fastener Length
Between 1.016 inches and 1.046 inches -
Head Style
Dished hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Hole Diameter
0.075 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hole Configuration Style
Hexagon corners -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf -
Specification Data
80205-nas6705 professional/industrial association standard
More from these suppliers
- 5940-00-581-9782 MPN NAS707G3Stud Terminal
- 5305-00-051-8493 MPN MS24625-9Tapping Screw
- 5305-00-057-0919 MPN NAS1219-04-6Machine Screw
- 5305-00-068-0506 MPN MS90726-6Hexagon Head Cap Screw
- 5305-00-160-9515 MPN MS24693-S66Machine Screw
- 5305-00-245-3510 MPN NAS1220-08-3Machine Screw
- 5305-00-269-4210 MPN MS24694S152Machine Screw
- 5305-00-282-4210 MPN NAS221-7Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-058-7047 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6705HU9 | National Aerospace Standards |
NAS6705UH9 | National Aerospace Standards |