NSN 5306-01-059-1948
Close Tolerance Hex Head Bolt
Between 4.848 inches and 4.878 inches fastener length, spline extended washer head style, between 0.690 inches and 0.710 inches head height, extended washer diameter: between 1.615 inches and 1.625 inches .
Manufacturer part number MS21297-14056 for national stock number 5306010591948.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-059-1948.
-
MPN or Model
MS21297-14056
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.338 inches and 1.388 inches -
Fastener Length
Between 4.848 inches and 4.878 inches -
Head Style
Spline extended washer -
Head Height
Between 0.690 inches and 0.710 inches -
Extended Washer Diameter
Between 1.615 inches and 1.625 inches -
Extended Washer Thickness
Between 0.116 inches and 0.136 inches -
Grip Diameter
Between 0.8730 inches and 0.8740 inches -
Thread Diameter
0.875 inches -
Grip Length
Between 3.490 inches and 3.510 inches -
Thready Qty Per Inch (tpi)
14 -
Surface Finish
32.0 microinches grip -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-390-0585 MPN NAS1101E3H12Machine Screw
- 5305-01-038-4763 MPN AIC811-6-23Socket Head Cap Screw
- 5305-01-101-1436 MPN AIC870-3-14Socket Head Cap Screw
- 5305-01-254-2786 MPN AIC4406-8Socket Head Cap Screw
- 5305-01-271-2041 MPN AIC940-5-7Machine Screw
- 5305-01-381-2343 MPN AIC818-4-320CSocket Head Cap Screw
- 5305-01-580-9993 MPN BACB30XD3K12Close Tolerance Screw
- 5305-01-601-1940 MPN PMT1153-14Close Tolerance Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-059-1948 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21297-14056 | National Aerospace Standards |
MS21297-14056 | Acufast Aircraft Products Inc. |
MS21297-14056 | Military Standards |
MS21297-14056 | Huck Intl Inc |
MS21297-14056 | Huck International, Inc. |
MS21297-14056 | Sps Technologies, Llc |
MS21297-14056 | Sps Technologies, Llc |