NSN 5306-01-060-6843
Close Tolerance Hex Head Bolt
Dry film lube per mil-l-8937b on bearing surface of head and grip.
Manufacturer part number PBF7521-8DN25 for national stock number 5306010606843.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-060-6843.
-
MPN or Model
PBF7521-8DN25
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.528 inches -
Fastener Length
Between 2.080 inches and 2.100 inches -
Head Style
Spline drive shear head -
Head Height
0.281 inches -
Width Between Flats
0.901 inches -
Grip Diameter
Between 0.4982 inches and 0.4991 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Thread Diameter
0.500 inches -
Grip Length
Between 1.552 inches and 1.572 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.825 inches first hole and 1.845 inches first hole -
Material
Stainless steel -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium top of head -
Surface Treatment Specification
Nas672 national specification single treatment response top of head -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-775-5676 MPN BACB30LU3-17Machine Screw
- 5305-01-202-8979 MPN BACB30LK3-7Close Tolerance Screw
- 5305-01-433-1007 MPN ST3M714-3-11Close Tolerance Screw
- 5305-01-435-6292 MPN BACB30LU9-18Close Tolerance Screw
- 5305-01-435-6611 MPN BACB30LU9-26Close Tolerance Screw
- 5305-01-512-8347 MPN 3M1169V3-27AClose Tolerance Screw
- 5306-01-011-4037 MPN VAL23033-4H5Shear Bolt
- 5306-01-054-3406 MPN C7521-4-7Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-060-6843 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF7521-8DN25 | Sps Technologies, Llc |
AIC596-8DN25 | Sps Technologies, Llc |
VS3133-8DN25 | Arconic Global Fasteners & Rings, |
VS3133-8DN25 | Alcoa Global Fasteners, Inc. |
C7521-8DN25 | Lockheed Martin Corporation |
C7521-8DN25 | Valley-todeco, Inc. |
VCG0009-8DN25 | Valley-todeco, Inc. |
H411-8DN25 | Ge Infrastructure Sensing, Inc. |
120978-8D25N | Sps Technologies, Llc |
C7521-8DN25 | Sps Technologies, Llc |
120978-8D25N | Sps Technologies, Llc |
C7521-8DN25 | Alcoa Global Fasteners, Inc. |
SF118-8DN25 | Saturn Fasteners Inc |
H411-8DN25 | Huck International, Inc. |
VS3133-8DN25 | Tactair Fluid Controls, Inc. |