NSN 5306-01-061-1957
Coaxial Connector
Pellet-type or strip-type or patch-type element on threads.
Manufacturer part number NAS6204L3 for national stock number 5306010611957.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-061-1957.
-
MPN or Model
NAS6204L3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.345 inches and 0.395 inches -
Fastener Length
Between 0.543 inches and 0.573 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.429 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas6204 professional/industrial association standard
More from these suppliers
- 5935-00-111-4884 MPN NAS1666-22Electrical Connector Cable Clamp
- 5940-00-900-2408 MPN NAS705C1Stud Terminal
- 5940-01-615-1073 MPN NAS1063C10-210HTerminal Board Marker Strip
- 5305-00-005-0629 MPN NAS1190E04P6LSocket Head Cap Screw
- 5305-00-035-5382 MPN NAS1581A3H11TClose Tolerance Screw
- 5305-00-053-1079 MPN MS35199-42Machine Screw
- 5305-00-059-8264 MPN MS35214-39Machine Screw
- 5305-00-104-7537 MPN NAS1189-04P6LSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-061-1957 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6204L3 | National Aerospace Standards |