NSN 5306-01-063-0283
Close Tolerance Hex Head Bolt
Between 1.062 inches and 1.082 inches fastener length, double hexagon head style, between 0.154 inches and 0.174 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number ST3M750-4-11K for national stock number 5306010630283.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-063-0283.
-
MPN or Model
ST3M750-4-11K
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093470 - Bolts/nuts I/s -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.356 inches -
Fastener Length
Between 1.062 inches and 1.082 inches -
Head Style
Double hexagon -
Head Height
Between 0.154 inches and 0.174 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.709 inches and 0.739 inches -
Thready Qty Per Inch (tpi)
28 -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.944 inches all holes and 0.964 inches all holes -
Material
Stainless steel -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-456-2431 MPN AIC813-5-R23Machine Screw
- 5305-00-765-3270 MPN BACB30LU3-4Machine Screw
- 5305-01-004-9520 MPN 965817-107CSocket Head Cap Screw
- 5305-01-114-5133 MPN NAS1101E4-26Machine Screw
- 5305-01-174-2708 MPN 51B650-3-5Machine Screw
- 5305-01-193-6809 MPN LE111-0032-2313Machine Screw
- 5305-01-206-5449 MPN AIC4037-04-02Machine Screw
- 5305-01-288-9156 MPN AIC9535-7-25Close Tolerance Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-063-0283 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M750-4-11K | Boeing Company, The |
121933-4-11K | Sps Technologies, Llc |
121933-4-11K | Sps Technologies, Llc |
ST3M750-4-11K | Sps Technologies, Llc |
ST3M750-4-11K | J M Precision Inc |
ST3M750-4-11K | Hi-shear Corporation |
ST3M750-4-11K | Alcoa Global Fasteners, Inc. |
ST3M750-4-11K | Lisi Aerospace Canada Corp |