NSN 5306-01-063-2341
Wheel Bolt
Between 0.752 inches and 0.812 inches fastener length, double hexagon w/hole head style, 0.422 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number MS9091-07 for national stock number 5306010632341.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-063-2341.
-
MPN or Model
MS9091-07
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.699 inches and 0.812 inches -
Fastener Length
Between 0.752 inches and 0.812 inches -
Head Style
Double hexagon w/hole -
Head Height
0.422 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Extended Washer Diameter
0.562 inches -
Extended Washer Thickness
Between 0.090 inches and 0.100 inches -
Hole Diameter
0.070 inches -
Thread Diameter
0.375 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon longitudinal hole -
Surface Finish
63.0 microinches bearing surface of head -
Material
Steel comp 8740 -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 5930-00-023-2420 MPN MS27409-1BToggle Switch
- 5935-00-051-4231 MPN MS24264R22T55P6Electrical Receptacle Connector
- 5935-00-174-0367 MPN MS27497E24B35PElectrical Receptacle Connector
- 5945-00-199-9592 MPN MS27243-3Electrical Relay Cover
- 5935-00-201-6620 MPN MS3106E28-16PElectrical Plug Connector
- 5935-00-252-6340 MPN MS35186-123AElectrical Connector Cover
- 5905-00-279-2670 MPN MS35043-228Composition Fixed Resistor
- 5935-00-280-1908 MPN MS3100C18-1SElectrical Receptacle Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-063-2341 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9091-07 | Military Standards |