NSN 5306-01-063-2346
Externally Relieved Body Bolt
Solid film lube with everlube 620or lube-lok 5396 per hs248 ty a1 cl 43.
Manufacturer part number 69336-256 for national stock number 5306010632346.
Datasheet
-
Product description
Externally Relieved Body Bolt NSN 5306-01-063-2346.
-
MPN or Model
69336-256
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.625 inches and 0.685 inches -
Fastener Length
0.750 inches -
Head Style
Double hexagon w/hole -
Head Height
0.258 inches -
Width Between Flats
Between 0.243 inches and 0.251 inches -
Extended Washer Diameter
0.375 inches -
Extended Washer Thickness
Between 0.040 inches and 0.050 inches -
First Diameter From Head
Between 0.165 inches and 0.175 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
Between 0.065 inches and 0.125 inches -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Minimum Yield Strength
107000 pounds per square inch -
Material
Steel -
Material Specification
Ams 5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-136-0877 MPN SPD80132-1Electrical Receptacle Connector
- 5905-00-578-0494 MPN HS7495-289Film Fixed Resistor
- 4920-00-610-6672 MPN HS7122Interface Device Adapter Assembly
- 4920-00-670-1593 MPN HS7624Aircraft Maintenance Fixture
- 4920-00-871-4434 MPN HS9215Cap
- 1560-01-304-9694 MPN 769246-1Inlet Compressor Duct
- 5905-01-337-3436 MPN 795472-002Thermal Resistor
- 4920-01-020-8032 MPN GS15200-1Aircraft Maintenance Fixture
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercuts for thread relief). It is no. 10 (0.190 in.) (5 mm) or larger in size and has a head which is not designed to be held or driven with an inserted driver or designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, internal wrenching and thumbscrew. See also screw, externally relieved body.
Pricing and Availability
Get a quote for 5306-01-063-2346 externally relieved body boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
69336-256 | Hamilton Sundstrand Corporation |