NSN 5306-01-063-3787
Close Tolerance Hex Head Bolt
Between 2.765 inches and 2.795 inches fastener length, spline extended washer head style, between 0.495 inches and 0.515 inches head height, width between flats: between 0.610 inches and 0.625 inches .
Manufacturer part number MS21296-09028 for national stock number 5306010633787.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-063-3787.
-
MPN or Model
MS21296-09028
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.005 inches and 1.055 inches -
Fastener Length
Between 2.765 inches and 2.795 inches -
Head Style
Spline extended washer -
Head Height
Between 0.495 inches and 0.515 inches -
Width Between Flats
Between 0.610 inches and 0.625 inches -
Extended Washer Diameter
Between 1.037 inches and 1.047 inches -
Extended Washer Thickness
Between 0.071 inches and 0.091 inches -
Grip Diameter
Between 0.5605 inches and 0.5615 inches -
Thread Diameter
0.562 inches -
Grip Length
Between 1.740 inches and 1.760 inches -
Thready Qty Per Inch (tpi)
18 -
Hardness Rating
51.0 rockwell c and 54.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-057-1720 MPN NAS1101-06-7Machine Screw
- 5305-00-242-4803 MPN AIC812-06-8Machine Screw
- 5305-00-364-9540 MPN HT4025L3-13Close Tolerance Screw
- 5305-00-944-5905 MPN 53B333-6Machine Screw
- 5305-01-133-9446 MPN BACB30MS6S10Close Tolerance Screw
- 5305-01-160-7561 MPN HT4027-5-18Close Tolerance Screw
- 5305-01-333-9889 MPN 1701-4-8Close Tolerance Screw
- 5305-01-350-2246 MPN AIC1658-4A11Close Tolerance Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-063-3787 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21296-09028 | Sps Technologies, Llc |
PBFMS21296-09028 | Sps Technologies, Llc |
MS21296-09028 | National Aerospace Standards |
MS21296-09028 | Military Standards |