NSN 5306-01-063-5415
Wheel Bolt
1.740 inches fastener length, double hexagon extended washer head style, 0.506 inches head height, width between flats: 0.562 inches .
Manufacturer part number 160D891511-9 for national stock number 5306010635415.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-063-5415.
-
MPN or Model
160D891511-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.437 inches -
Fastener Length
1.740 inches -
Head Style
Double hexagon extended washer -
Head Height
0.506 inches -
Width Between Flats
0.562 inches -
Extended Washer Diameter
Between 0.818 inches and 0.828 inches -
Extended Washer Thickness
0.125 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Thread Diameter
0.500 inches -
Thready Qty Per Inch (tpi)
20 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.575 inches first hole -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium -
Surface Treatment Specification
A-+501 fscm 77751 mfr ref single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-066-6350 MPN 123P10326-2Cowl Panel Assembly
- 5935-00-122-0032 MPN GC15A4P16-848SElectrical Plug Connector
- 1560-00-165-7344 MPN 88724-2Aircraft Access Door
- 5940-00-204-9169 MPN GT805CW-1Lug Terminal
- 5935-00-211-0963 MPN GA800NB18-12Electrical Connector Backshell
- 1560-00-243-4407 MPN 1128ABP40042-3Fairing Assy
- 1680-00-462-9666 MPN 128SB11396-1Elect Control Panel
- 5940-00-617-2896 MPN GT805H14-3ALug Terminal
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-063-5415 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
160D891511-9 | Northrop Grumman Systems Corporation |
160D891511-9 | Northrop Grumman Systems Corporation |
160D891511-9 | Northrop Grumman Systems Corporation |