NSN 5306-01-063-8477
Wheel Bolt
Between 0.615 inches and 0.635 inches fastener length, hexagon head style, between 0.240 inches and 0.260 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number MS9584-08 for national stock number 5306010638477.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-063-8477.
-
MPN or Model
MS9584-08
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.516 inches and 0.556 inches -
Fastener Length
Between 0.615 inches and 0.635 inches -
Head Style
Hexagon -
Head Height
Between 0.240 inches and 0.260 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Hole Diameter
0.070 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.079 inches and 0.099 inches -
Hole Quantity
6 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
24.0 rockwell c and 35.0 rockwell c -
Minimum Yield Strength
85000 pounds per square inch -
Hole Configuration Style
Hexagon corners -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-014-6521 MPN MS3111F10-6PElectrical Plug Connector
- 5935-00-052-2078 MPN MS3100R28-18PElectrical Receptacle Connector
- 5905-00-069-3919 MPN MS35834-397Film Fixed Resistor
- 5940-00-115-5001 MPN MS20659-135Lug Terminal
- 5935-00-163-3644 MPN MS27473T18A32SElectrical Plug Connector
- 5935-00-171-0135 MPN MS27474T14B18PElectrical Receptacle Connector
- 5935-00-189-1486 MPN MS3113H20C39PElectrical Receptacle Connector
- 5935-00-247-5850 MPN MS27473P22B55SElectrical Plug Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-063-8477 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9584-08 | Military Standards |
MS9584-08 | Military Standards |
MS9584-08 | Military Standards |
MS9584-08 | Military Standards |