NSN 5306-01-064-3602
Coaxial Connector
Between 3.288 inches and 3.335 inches fastener length, double hexagon head style, 0.468 inches head height, width between flats: between 1.239 inches and 1.252 inches .
Manufacturer part number EWSB22-14-37 for national stock number 5306010643602.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-064-3602.
-
MPN or Model
EWSB22-14-37
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.7 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.966 inches and 1.033 inches -
Fastener Length
Between 3.288 inches and 3.335 inches -
Head Style
Double hexagon -
Head Height
0.468 inches -
Width Between Flats
Between 1.239 inches and 1.252 inches -
Grip Diameter
Between 0.8730 inches and 0.8740 inches -
Shank Unthreaded Hole Diameter
0.136 inches first hole and 0.146 inches first hole -
Thread Diameter
0.875 inches -
Grip Length
Between 2.302 inches and 2.322 inches -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.164 inches first hole and 3.176 inches first hole -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-127-2506 MPN 16990L4C16Socket Head Cap Screw
- 5305-00-754-2071 MPN NAS1203-9Close Tolerance Screw
- 5305-00-819-1115 MPN NAS1101-3-10Machine Screw
- 5305-00-959-2519 MPN NAS1203-48Close Tolerance Screw
- 5305-01-023-8192 MPN NAS1191-04T3BSocket Head Cap Screw
- 5305-01-047-0483 MPN HT4011-6-14Shoulder Screw
- 5305-01-057-0347 MPN 66117H9-19Close Tolerance Screw
- 5305-01-076-4898 MPN SD30078Hexagon Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-064-3602 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWSB22-14-37 | Sps Technologies, Llc |
EWSB22-14-37 | Sps Technologies, Llc |