NSN 5306-01-064-4056
Coaxial Connector
Between 0.683 inches and 0.713 inches fastener length, between 0.110 inches and 0.125 inches head height, between 0.367 inches and 0.376 inches width between flats, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS6403-6 for national stock number 5306010644056.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-064-4056.
-
MPN or Model
NAS6403-6
-
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Length
Between 0.298 inches and 0.348 inches -
Fastener Length
Between 0.683 inches and 0.713 inches -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Grip Length
Between 0.365 inches and 0.385 inches
More from these suppliers
- 5940-01-384-3892 MPN NAS1063A8TB98TTerminal Board Marker Strip
- 5935-01-661-3034 MPN ES962VTElectrical Modular Receptacle Connector
- 5305-00-046-6987 MPN NAS1101E06-12BMachine Screw
- 5305-00-051-4135 MPN MS24694C94Machine Screw
- 5305-00-052-0524 MPN MS24678-54CSocket Head Cap Screw
- 5305-00-080-9237 MPN NAS584-10Machine Screw
- 5305-00-140-4860 MPN NAS1096-1-56Machine Screw
- 5305-00-151-0011 MPN NASM24693-S302Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-064-4056 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6403-6 | National Aerospace Standards |