NSN 5306-01-064-5465
Coaxial Connector
Between 0.433 inches and 0.463 inches fastener length, between 0.110 inches and 0.125 inches head height, between 0.367 inches and 0.376 inches width between flats, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS6403-2 for national stock number 5306010645465.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-064-5465.
-
MPN or Model
NAS6403-2
-
NMF (National Motor Freight)
013280 - Alum Bolts -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Length
Between 0.298 inches and 0.348 inches -
Fastener Length
Between 0.433 inches and 0.463 inches -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Grip Length
Between 0.115 inches and 0.135 inches
More from these suppliers
- 5940-01-451-4407 MPN NAS1063A10-105BVTerminal Board Marker Strip
- 5935-00-111-1892 MPN NAS1665-16Electrical Connector Backshell
- 5305-00-060-7858 MPN NAS1081-08A3Setscrew
- 5305-00-078-0185 MPN NAS602-56PMachine Screw
- 5305-00-170-2931 MPN NAS1352C8-10Socket Head Cap Screw
- 5305-00-182-7462 MPN NAS1352-10LE20PSocket Head Cap Screw
- 5305-00-236-1375 MPN NAS1101C06H3Machine Screw
- 5305-00-243-8319 MPN NAS1101E4-6Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-064-5465 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6403-2 | National Aerospace Standards |