NSN 5306-01-064-6263
Close Tolerance Hex Head Bolt
Paint color white.
Manufacturer part number PB14157-04016 for national stock number 5306010646263.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-064-6263.
-
MPN or Model
PB14157-04016
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Length
Between 0.530 inches and 0.580 inches -
Fastener Length
Between 1.540 inches and 1.570 inches -
Head Height
Between 0.240 inches and 0.260 inches -
Extended Washer Diameter
Between 0.235 inches and 0.250 inches -
Extended Washer Thickness
Between 0.035 inches and 0.055 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Grip Length
Between 0.990 inches and 1.010 inches
More from these suppliers
- 5305-00-304-8770 MPN PBF1069-102CSocket Head Cap Screw
- 5305-00-310-5581 MPN PBF1069-309CSocket Head Cap Screw
- 5305-00-508-5088 MPN LS15267V3-36Machine Screw
- 5305-01-206-3472 MPN PBF1202-6-12Close Tolerance Screw
- 5305-01-512-8294 MPN TX1027C6-16AClose Tolerance Screw
- 5305-01-512-8364 MPN TX1027C4-18AClose Tolerance Screw
- 5305-01-627-3025 MPN JSFB34V08-4Machine Screw
- 5305-01-627-4281 MPN JSFB34V3H6Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-064-6263 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PB14157-04016 | Sps Technologies, Llc |
MS14157-04016 | National Aerospace Standards |
MS14157-04016 | Military Standards |