NSN 5306-01-064-6264
Close Tolerance Hex Head Bolt
Paint color white.
Manufacturer part number MS14157-05020 for national stock number 5306010646264.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-064-6264.
-
MPN or Model
MS14157-05020
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.618 inches and 0.668 inches -
Fastener Length
Between 1.878 inches and 1.908 inches -
Head Style
Spline extended washer -
Head Height
Between 0.302 inches and 0.322 inches -
Width Between Flats
Between 0.383 inches and 0.389 inches -
Extended Washer Diameter
Between 0.521 inches and 0.531 inches -
Extended Washer Thickness
Between 0.051 inches and 0.071 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Head Minor Diameter
Between 0.383 inches and 0.389 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 1.240 inches and 1.260 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Steel comp 8740 or steel comp 4340 -
Material Specification
Mil-s-6049 military specification 1st material response or mil-s-5000 military specification 2nd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type 1 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-572-8706 MPN L3003943-031Aircraft Access Door
- 5305-00-005-0629 MPN NAS1742C04R6Socket Head Cap Screw
- 5305-00-059-3662 MPN NAS1635-3-14Machine Screw
- 5305-00-081-1474 MPN NAS608C832H24Socket Head Cap Screw
- 5305-00-088-1053 MPN MS16988 MOD 5/16D X 2.75 LGSocket Head Cap Screw
- 5305-00-159-5605 MPN NAS601-36Machine Screw
- 5305-00-165-8023 MPN NAS514P632-4PMachine Screw
- 5305-00-269-4521 MPN MS24694S176Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-064-6264 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS14157-05020 | National Aerospace Standards |
MS14157-05020 | Military Standards |