NSN 5306-01-065-6308
Close Tolerance Hex Head Bolt
Between 2.143 inches and 2.163 inches fastener length, spline drive shear head head style, 0.281 inches head height, grip diameter: between 0.4982 inches and 0.4991 inches .
Manufacturer part number AIC596-8-26 for national stock number 5306010656308.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-065-6308.
-
MPN or Model
AIC596-8-26
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.528 inches -
Fastener Length
Between 2.143 inches and 2.163 inches -
Head Style
Spline drive shear head -
Head Height
0.281 inches -
Grip Diameter
Between 0.4982 inches and 0.4991 inches -
Head Minor Diameter
0.901 inches -
End Application
Aircraft, f-16 -
Thread Diameter
0.500 inches -
Grip Length
Between 1.615 inches and 1.625 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Stainless steel -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 national specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-354-4605 MPN ST3M455-3L9-1Close Tolerance Screw
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
- 5305-01-600-3722 MPN 3M1277E3D15AMachine Screw
- 5306-00-143-2021 MPN VFK100G-09020Shear Bolt
- 5306-01-044-6564 MPN VEH160271-3M-2Close Tolerance Bolt
- 5306-01-046-0507 MPN VAL23608-4D10Shoulder Bolt
- 5306-01-054-3423 MPN C7521L6-20Shear Bolt
- 5306-01-054-3423 MPN VCG0009L6-20Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-065-6308 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC596-8-26 | Sps Technologies, Llc |
PBF7521-8-26 | Sps Technologies, Llc |
120978-8-26 | Sps Technologies, Llc |
VCG0009-8-26 | Valley-todeco, Inc. |
H411-8-26 | Huck International, Inc. |
120978-8-26 | Sps Technologies, Llc |
VS3133-8-26 | Alcoa Global Fasteners, Inc. |
C7521-8-26 | Lockheed Martin Corporation |
C7521-8-26 | Arconic Global Fasteners & Rings, |
C7521-8-26 | Valley-todeco, Inc. |