NSN 5306-01-065-6309
Close Tolerance Hex Head Bolt
Between 2.036 inches and 2.056 inches fastener length, double hexagon head style, 0.257 inches head height, width between flats: between 0.678 inches and 0.689 inches .
Manufacturer part number 121933-7-25 for national stock number 5306010656309.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-065-6309.
-
MPN or Model
121933-7-25
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.484 inches -
Fastener Length
Between 2.036 inches and 2.056 inches -
Head Style
Double hexagon -
Head Height
0.257 inches -
Width Between Flats
Between 0.678 inches and 0.689 inches -
Grip Diameter
Between 0.4365 inches and 0.4370 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.111 inches first hole -
Thread Diameter
0.437 inches -
Grip Length
Between 1.552 inches and 1.572 inches -
Thready Qty Per Inch (tpi)
20 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.901 inches first hole and 1.921 inches first hole -
Material
Stainless steel -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-162-4064 MPN 66584-08-9Machine Screw
- 5305-00-186-9221 MPN SFT22-4A30Close Tolerance Screw
- 5305-00-551-4843 MPN HT4025L4-13Close Tolerance Screw
- 5305-00-720-9112 MPN NAS1204-4Close Tolerance Screw
- 5305-00-767-8201 MPN 38030K3C8ZSocket Head Cap Screw
- 5305-00-969-4379 MPN SFT930-4-26Machine Screw
- 5305-01-127-4526 MPN 20098-3F-28Socket Head Cap Screw
- 5305-01-132-1064 MPN 110179-4-13ASClose Tolerance Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-065-6309 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
121933-7-25 | Sps Technologies, Llc |
121933-7-25 | Sps Technologies, Llc |