NSN 5306-01-067-3365
Wheel Bolt
Between 1.740 inches and 1.760 inches fastener length, hexagon head style, between 0.182 inches and 0.198 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number MS9502-24 for national stock number 5306010673365.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-067-3365.
-
MPN or Model
MS9502-24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.865 inches and 0.945 inches -
Fastener Length
Between 1.740 inches and 1.760 inches -
Head Style
Hexagon -
Head Height
Between 0.182 inches and 0.198 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Hole Diameter
Between 0.060 inches and 0.070 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.815 inches and 0.875 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
24.0 rockwell c and 35.0 rockwell c -
Minimum Yield Strength
85000 pounds per square inch -
Hole Configuration Style
Hexagon flats -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-113-3144 MPN MS20659-126Lug Terminal
- 5935-00-132-2539 MPN MS17350N24Electrical Connector Cover
- 5935-00-147-7316 MPN MS3106F24-6PElectrical Plug Connector
- 5935-00-173-1088 MPN MS347L20-41SYElectrical Receptacle Connector
- 5935-00-196-2237 MPN MS3106A18-20SElectrical Plug Connector
- 5935-00-243-2686 MPN MS27484E22B2PAElectrical Plug Connector
- 5935-00-252-0997 MPN MS3114E22-41SElectrical Receptacle Connector
- 5940-00-271-7258 MPN MS35431-5Lug Terminal
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-067-3365 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9502-24 | Military Standards |