NSN 5306-01-070-1711
Close Tolerance Hex Head Bolt
Between 0.766 inches and 0.796 inches fastener length, hexagon head style, between 0.109 inches and 0.141 inches head height, width between flats: between 0.365 inches and 0.377 inches .
Manufacturer part number BACB30BG3K6A for national stock number 5306010701711.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-070-1711.
-
MPN or Model
BACB30BG3K6A
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.381 inches and 0.431 inches -
Fastener Length
Between 0.766 inches and 0.796 inches -
Head Style
Hexagon -
Head Height
Between 0.109 inches and 0.141 inches -
Width Between Flats
Between 0.365 inches and 0.377 inches -
Grip Diameter
Between 0.1885 inches and 0.1894 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
140000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Copper alloy 172 or copper alloy 173 or nickel alloy k-500 -
Material Specification
Qq-c-530 temper a federal specification 1st material response or qq-c-530 temper a federal specification 2nd material response or qq-n-286 federal specification 3rd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type 1 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5940-00-082-4665 MPN BACT42C2A1Terminal Board
- 1560-00-233-1103 MPN 50-6237-3009Elevator Balance Weight
- 1680-00-306-9185 MPN 6-54923-2Actuator Signal Arm
- 1560-00-340-9347 MPN 5-96781-3Cowling Flap
- 1680-00-349-4699 MPN 90-3590Ac Gear And Bearing
- 5975-00-410-8835 MPN 29-4556-1Junction Box
- 1560-00-455-3840 MPN 65-17640-168Fin Attaching Parts Kit
- 1560-00-563-7344 MPN 3-70254-7Drain Seal
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-070-1711 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30BG3K6A | The Boeing Company |