NSN 5306-01-070-1713
Close Tolerance Hex Head Bolt
0.120 spherical radius 30.0 degree on point.
Manufacturer part number 160D960123-19 for national stock number 5306010701713.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-070-1713.
-
MPN or Model
160D960123-19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.560 inches and 0.565 inches -
Fastener Length
2.538 inches -
Head Style
Hexagon -
Head Height
Between 0.296 inches and 0.328 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.145 inches first hole -
Thread Diameter
0.625 inches -
Grip Length
Between 1.973 inches and 1.978 inches -
Thready Qty Per Inch (tpi)
18 -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.353 inches first hole -
Material
Steel comp 4340 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-146-2186 MPN A51B51001-2Outboard Slat Assy
- 1560-00-165-7616 MPN 87791-1RAircraft Latch Assembly
- 5975-00-175-6690 MPN GA800MJ26Conflex Fitting
- 5935-00-201-7095 MPN GC15A4P16S8SElectrical Plug Connector
- 1560-00-278-3941 MPN 123WP10002-4Scoop Assembly
- 1560-00-306-3118 MPN 94409RStabilizer Yoke Assembly
- 5930-00-323-1297 MPN 128SCSEA776-1Stepping Switch
- 4820-00-392-0600 MPN A51H9213-1Fluid Pressure Regulating Valve
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-070-1713 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
160D960123-19 | Northrop Grumman Systems Corporation |
160D960123-19 | Northrop Grumman Systems Corporation |