NSN 5306-01-070-2982
Close Tolerance Hex Head Bolt
Between 1.078 inches and 1.108 inches fastener length, hexagon head style, between 0.172 inches and 0.204 inches head height, width between flats: between 0.490 inches and 0.502 inches .
Manufacturer part number BACB30BG5K9A for national stock number 5306010702982.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-070-2982.
-
MPN or Model
BACB30BG5K9A
-
NMF (National Motor Freight)
139820 - Nickel Bolts/nails/nuts/rivets Etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.506 inches and 0.556 inches -
Fastener Length
Between 1.078 inches and 1.108 inches -
Head Style
Hexagon -
Head Height
Between 0.172 inches and 0.204 inches -
Width Between Flats
Between 0.490 inches and 0.502 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
140000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Copper alloy or nickel alloy k-500 -
Material Specification
Qq-c-530 cond a federal specification 1st material response or qq-n-286 cl a federal specification 2nd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type 1, cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1680-00-010-1479 MPN 107S2434-8Door H Pin Assembly
- 5930-00-034-0581 MPN 10-2568-13Rotary Switch
- 1560-00-117-8690 MPN 69-1512Aircraft Structural Component Support
- 1560-00-328-1076 MPN 50-1575-5Nacelle Drum Assembly
- 1560-00-340-8832 MPN 60-2708Flap Valve Control Crank
- 1560-00-397-0194 MPN 5-66597-21niversal Ball Joint Housing
- 5905-00-442-4194 MPN 25-44193-24Resistor Assembly
- 5930-00-583-1684 MPN 10-20011Pressure Switch
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-070-2982 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30BG5K9A | The Boeing Company |