NSN 5306-01-071-5694
Wheel Bolt
Between 0.615 inches and 0.635 inches fastener length, hexagon head style, between 0.106 inches and 0.146 inches head height, width between flats: 0.419 inches .
Manufacturer part number R141P04N for national stock number 5306010715694.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-071-5694.
-
MPN or Model
R141P04N
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.615 inches and 0.635 inches -
Fastener Length
Between 0.615 inches and 0.635 inches -
Head Style
Hexagon -
Head Height
Between 0.106 inches and 0.146 inches -
Width Between Flats
0.419 inches -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Stainless steel -
Material Specification
Ams 6304 assn standard single material response -
Surface Treatment
Nickel -
Surface Treatment Specification
Ams 2403 assn standard single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 4920-00-354-8216 MPN 1C2461P8Test Stand Clamp
- 5905-00-958-5541 MPN R984P0640AInductive Wire Wound Fixed Resistor
- 4920-00-970-4929 MPN 1C2920G2Test Stand-flow Div
- 4920-01-045-9061 MPN 21C5810P01Aircraft Engine Maintenance Fixture
- 4920-01-113-3188 MPN 21C8269G01Antirotation Pin Staking Tool
- 4820-01-238-7819 MPN 1406M19P01Pressure And Temperature Relief Valve
- 5930-01-331-5500 MPN 1363M42P01Thermostatic Switch
- 4920-01-469-6899 MPN 3R1373G01Aircraft Engine Maintenance Fixture
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-071-5694 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
R141P04N | General Electric Company |