NSN 5306-01-071-7106
Wheel Bolt
Between 8.688 inches and 8.750 inches fastener length, hexagon head style, between 0.265 inches and 0.297 inches head height, width between flats: between 0.740 inches and 0.752 inches .
Manufacturer part number AN8C85 for national stock number 5306010717106.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-071-7106.
-
MPN or Model
AN8C85
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.749 inches and 0.828 inches -
Fastener Length
Between 8.688 inches and 8.750 inches -
Head Style
Hexagon -
Head Height
Between 0.265 inches and 0.297 inches -
Width Between Flats
Between 0.740 inches and 0.752 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Thread Diameter
0.500 inches -
Grip Length
Between 7.922 inches and 7.954 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
8.531 inches first hole and 8.563 inches first hole -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-01-070-3679 MPN AN3106A28-11SCElectrical Plug Connector
- 5935-01-146-4089 MPN AN3106A20-29PWElectrical Plug Connector
- 5305-00-013-3712 MPN AN505Machine Screw
- 5305-00-063-5853 MPN AN509-10-16Machine Screw
- 5305-00-150-9597 MPN AN509-416R34Machine Screw
- 5305-00-151-1582 MPN AN520-8-14Machine Screw
- 5305-00-151-2698 MPN AN526-836-10Machine Screw
- 5305-00-151-3688 MPN AN510-416-14Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-071-7106 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN8C85 | Aeronautical Standards Group |