NSN 5306-01-071-8761
Coaxial Connector
Between 2.901 inches and 2.931 inches fastener length, spline extended washer head style, between 0.440 inches and 0.460 inches head height, extended washer diameter: between 0.922 inches and 0.932 inches .
Manufacturer part number MS21297-08033 for national stock number 5306010718761.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-071-8761.
-
MPN or Model
MS21297-08033
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.829 inches and 0.879 inches -
Fastener Length
Between 2.901 inches and 2.931 inches -
Head Style
Spline extended washer -
Head Height
Between 0.440 inches and 0.460 inches -
Extended Washer Diameter
Between 0.922 inches and 0.932 inches -
Extended Washer Thickness
Between 0.062 inches and 0.082 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Head Minor Diameter
Between 0.547 inches and 0.562 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 2.052 inches and 2.072 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Mil-c-8837 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-146-3594 MPN ST3M454-5L13Close Tolerance Screw
- 5305-01-175-9235 MPN VFQ402-13Hexagon Head Cap Screw
- 5305-01-477-5761 MPN 3M1169V5-17AClose Tolerance Screw
- 5305-01-513-9494 MPN ST3M557-3-10Close Tolerance Screw
- 5305-01-563-3402 MPN ST3M557-6-10Close Tolerance Screw
- 5305-01-650-1512 MPN 3M958-4-4Close Tolerance Screw
- 5306-00-003-9388 MPN VFK100G-08052Shear Bolt
- 5306-00-432-3883 MPN VAL22034-6FS19Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-071-8761 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21297-08033 | Sps Technologies, Llc |
MS21297-08033 | Sps Technologies, Llc |
VFK101G8-033 | Valley-todeco, Inc. |
MS21297-08033 | National Aerospace Standards |
MS21297-08033 | Huck International, Inc. |
MS21297-08033 | Military Standards |
MS21297-08033 | Huck Intl Inc |