NSN 5306-01-072-0361
Close Tolerance Hex Head Bolt
Between 4.679 inches and 4.709 inches fastener length, double hexagon w/hole head style, 0.435 inches head height, width between flats: between 0.494 inches and 0.503 inches .
Manufacturer part number SPS52634-7-64 for national stock number 5306010720361.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-072-0361.
-
MPN or Model
SPS52634-7-64
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.694 inches -
Fastener Length
Between 4.679 inches and 4.709 inches -
Head Style
Double hexagon w/hole -
Head Height
0.435 inches -
Width Between Flats
Between 0.494 inches and 0.503 inches -
Extended Washer Diameter
Between 0.740 inches and 0.750 inches -
Extended Washer Thickness
0.099 inches -
Hole Diameter
Between 0.050 inches and 0.060 inches -
Grip Diameter
Between 0.4672 inches and 0.4682 inches -
Thread Diameter
0.437 inches -
Grip Length
Between 3.990 inches and 4.010 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hole Configuration Style
Double hexagon longitudinal hole -
Material
Steel comp 8740 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 1, cl c federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-080-9427 MPN 3MA584-17Machine Screw
- 5305-00-810-1260 MPN 53B333-5Close Tolerance Screw
- 5305-01-004-9496 MPN 106752-08-306Machine Screw
- 5305-01-018-8929 MPN HT4036-4-23Close Tolerance Screw
- 5305-01-023-9049 MPN NAS1189E02P4BSocket Head Cap Screw
- 5305-01-025-6964 MPN HT4017-08-7Close Tolerance Screw
- 5305-01-107-3547 MPN 965812-7CMachine Screw
- 5305-01-118-8867 MPN 106750-4-21Close Tolerance Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-072-0361 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SPS52634-7-64 | Sps Technologies, Llc |