NSN 5306-01-073-2927
Shouldered Rivet Ring Bolt
About this product
Between 0.190 inches and 0.192 inches eye inside diameter, 0.078 inches shoulder thickness, between 0.890 inches and 0.937 inches shank length, eye stock thickness: between 0.120 inches and 0.130 inches .
Manufacturer part number NASM42THRU49 for national stock number 5306010732927.
Datasheet
-
Product description
Eye Bolt NSN 5306-01-073-2927.
-
MPN or Model
NASM42THRU49
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.453 inches and 0.500 inches -
Eye Inside Diameter
Between 0.190 inches and 0.192 inches -
Shoulder Thickness
0.078 inches -
Shank Length
Between 0.890 inches and 0.937 inches -
Eye Stock Thickness
Between 0.120 inches and 0.130 inches -
Shoulder Diameter
0.500 inches -
Shank Unthreaded Hole Diameter
0.066 inches first hole and 0.086 inches first hole -
Overall Length
Between 1.640 inches and 1.687 inches -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Distance From Center Of Eye To Shank End
Between 1.359 inches and 1.406 inches -
Distance From Threaded End To Shank Hole Center
0.126 inches first hole and 0.203 inches first hole -
Eye Outside Width
0.500 inches -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-451-4001 MPN NAS1063A10-105BSTerminal Board Marker Strip
- 5940-00-827-0772 MPN NAS1063A6-1Terminal Board Marker Strip
- 5305-00-007-2962 MPN NAS1743C3T14Socket Head Cap Screw
- 5305-00-034-1382 MPN NAS1624E7Machine Screw
- 5305-00-038-6682 MPN NAS1581F3H4Close Tolerance Screw
- 5305-00-050-9217 MPN MS24678-48CSocket Head Cap Screw
- 5305-00-057-2671 MPN NAS1101-3-7Machine Screw
- 5305-00-059-3667 MPN MS51958-71Machine Screw
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-01-073-2927 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NASM42THRU49 | National Aerospace Standards |
AN43B-C7 | National Aerospace Standards |
AN43B-C7 | Aeronautical Standards Group |
Stock Check
Availability for this item was last checked on 06/05/23.
The quantities and conditions available at the time were:
- NS: 1
- AR: 1
- NE: 481