NSN 5306-01-073-3625
Wheel Bolt
Between 1.302 inches and 1.322 inches fastener length, hexagon head style, between 0.134 inches and 0.150 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number MS9529-19 for national stock number 5306010733625.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-073-3625.
-
MPN or Model
MS9529-19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.680 inches and 0.690 inches -
Fastener Length
Between 1.302 inches and 1.322 inches -
Head Style
Hexagon -
Head Height
Between 0.134 inches and 0.150 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Hole Diameter
Between 0.042 inches and 0.052 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.622 inches and 0.632 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
32 -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon flats -
Surface Finish
32.0 microinches threads -
Material
Steel -
Material Specification
Ams 6322 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Amc 2400 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-018-0304 MPN MS3120F22-21SElectrical Receptacle Connector
- 5940-00-034-6942 MPN MS18029-6S-12Terminal Board Cover
- 5935-00-108-7039 MPN MS3103-20-22PElectrical Receptacle Connector
- 5940-00-113-8190 MPN MS25036-122Lug Terminal
- 5940-00-114-1310 MPN MS25036-119Lug Terminal
- 5940-00-143-5284 MPN MS25036-115Lug Terminal
- 5935-00-189-9364 MPN MS25183-12S-3SWElectrical Plug Connector
- 5935-00-205-8968 MPN MS3158-24NElectrical Connector Backshell
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-073-3625 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9529-19 | Military Standards |