NSN 5306-01-074-0173
Coaxial Connector
Between 0.745 inches and 0.775 inches fastener length, spline extended washer head style, between 0.194 inches and 0.234 inches head height, extended washer diameter: between 0.460 inches and 0.470 inches .
Manufacturer part number MS21297-04004 for national stock number 5306010740173.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-074-0173.
-
MPN or Model
MS21297-04004
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.485 inches and 0.535 inches -
Fastener Length
Between 0.745 inches and 0.775 inches -
Head Style
Spline extended washer -
Head Height
Between 0.194 inches and 0.234 inches -
Extended Washer Diameter
Between 0.460 inches and 0.470 inches -
Extended Washer Thickness
Between 0.026 inches and 0.046 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Head Minor Diameter
Between 0.318 inches and 0.324 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Mil-c-8837 type 2 cl 2 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-046-9990 MPN BACB30LU2-5Close Tolerance Screw
- 5305-00-112-1247 MPN 51B294-7Close Tolerance Screw
- 5305-00-505-3954 MPN LS15267V3-26Machine Screw
- 5305-01-025-1345 MPN NAS1101E06-8Machine Screw
- 5305-01-054-6281 MPN AIC984-3-8Close Tolerance Screw
- 5305-01-055-9733 MPN AIC984-3-3Close Tolerance Screw
- 5305-01-084-5394 MPN NAS1101E08-12Machine Screw
- 5305-01-109-1350 MPN AIC985-10-36Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-074-0173 shear boltManufacturer Part Numbers and Alternates
| MPN manufacturer part number | Registrant or Supplier |
|---|---|
| MS21297-04004 | Sps Technologies, Llc |
| MS21297-04004 | Sps Technologies, Llc |
| MS21297-04004 | Huck International, Inc. |
| MS21297-04004 | National Aerospace Standards |
| VFK101G4-004 | Hy-way Heat Systems Inc |
| MS21297-04004 | Military Standards |
| MS21297-04004 | Huck Intl Inc |
Stock Check
- NS: 8
- NE: 223