NSN 5306-01-077-0171
Close Tolerance Hex Head Bolt
Detent ring in shank.
Manufacturer part number ST3M735-4-104 for national stock number 5306010770171.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-077-0171.
-
MPN or Model
ST3M735-4-104
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.282 inches and 0.333 inches -
Fastener Length
Between 6.918 inches and 6.938 inches -
Head Style
Dished hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 6.500 inches and 6.516 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
6.818 inches first hole and 6.848 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 4130 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
76301-st3-735 manufacturers standard
More from these suppliers
- 5306-01-025-6435 MPN ST3M453-4-13Close Tolerance Bolt
- 5306-01-648-2902 MPN NAS1160-4-22DShoulder Bolt
- 1560-00-078-0795 MPN 32-33002-10Aircraft Skin
- 5985-00-110-8533 MPN 32-87850-83Waveguide Assembly
- 5945-00-147-7339 MPN 53-790059-3Electromagnetic Relay
- 1560-00-166-9383 MPN 32-32101-47Aircraft Frame
- 1560-00-173-3963 MPN 53G970838-33Aircraft Skin
- 1680-00-214-0536 MPN 68A620028-1003Bell Crank
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-077-0171 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M735-4-104 | Boeing Company, The |
121673-4-104 | Sps Technologies, Llc |
ST3M735-4-104 | M.s. Aerospace Inc. |