NSN 5306-01-077-3064
Wheel Bolt
Between 5.703 inches and 5.750 inches fastener length, hexagon head style, between 0.265 inches and 0.297 inches head height, width between flats: between 0.740 inches and 0.752 inches .
Manufacturer part number AN8C55A for national stock number 5306010773064.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-077-3064.
-
MPN or Model
AN8C55A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.749 inches and 0.828 inches -
Fastener Length
Between 5.703 inches and 5.750 inches -
Head Style
Hexagon -
Head Height
Between 0.265 inches and 0.297 inches -
Width Between Flats
Between 0.740 inches and 0.752 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 4.922 inches and 4.954 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-191-4649 MPN AN3100A18-1PElectrical Receptacle Connector
- 5935-00-235-8012 MPN AN3102A24-21SElectrical Receptacle Connector
- 5935-00-259-1814 MPN AN3106A14S9PElectrical Plug Connector
- 5975-00-263-1100 MPN AN3064-10Conduit Chase Nipple
- 5935-01-151-1239 MPN AN3106-20-18PElectrical Plug Connector
- 5305-00-151-0335 MPN AN501-6-5Machine Screw
- 5305-00-151-0599 MPN AN520-416R7Machine Screw
- 5305-00-151-1677 MPN AN510C10-6Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-077-3064 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN8C55A | Aeronautical Standards Group |