NSN 5306-01-077-3080
Coaxial Connector
Between 1.018 inches and 1.048 inches fastener length, dished hexagon head style, between 0.110 inches and 0.125 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number BACB30LM3U11 for national stock number 5306010773080.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-077-3080.
-
MPN or Model
BACB30LM3U11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.320 inches and 0.370 inches -
Fastener Length
Between 1.018 inches and 1.048 inches -
Head Style
Dished hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
81205-bacb30lm manufacturers standard
More from these suppliers
- 5305-00-137-8207 MPN B3110-01Screw
- 5305-00-505-2723 MPN LS15262V08-10Machine Screw
- 5305-00-515-6926 MPN AIC551C3-430Shoulder Screw
- 5305-00-810-1266 MPN 51B334-40HClose Tolerance Screw
- 5305-00-954-6087 MPN NAS1102-06-9Machine Screw
- 5305-01-217-2923 MPN BACB30LU4-26XShoulder Screw
- 5305-01-329-6668 MPN AIC1700-5-11Close Tolerance Screw
- 5305-01-359-4725 MPN AIC4038E-11Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-077-3080 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LM3U11 | The Boeing Company |
BACB30LM3U11 | Huck International, Inc. |
BACB30LM3U11 | Sps Technologies, Llc |
BACB30LM3U11 | Alcoa Global Fasteners, Inc. |
BACB30LM3U11 | Huck Intl Inc |