NSN 5306-01-077-3880
Wheel Bolt
Between 2.203 inches and 2.250 inches fastener length, hexagon head style, between 0.234 inches and 0.266 inches head height, width between flats: between 0.615 inches and 0.627 inches .
Manufacturer part number AN7C21A for national stock number 5306010773880.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-077-3880.
-
MPN or Model
AN7C21A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.625 inches and 0.704 inches -
Fastener Length
Between 2.203 inches and 2.250 inches -
Head Style
Hexagon -
Head Height
Between 0.234 inches and 0.266 inches -
Width Between Flats
Between 0.615 inches and 0.627 inches -
Thread Diameter
0.438 inches -
Grip Length
Between 1.546 inches and 1.578 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-201-7016 MPN AN3108A28-15SElectrical Plug Connector
- 5935-00-227-8439 MPN AN3106A32-13PElectrical Plug Connector
- 5935-00-280-1991 MPN AN3102A36-1SElectrical Receptacle Connector
- 5935-00-280-2032 MPN AN3100C14S5PElectrical Receptacle Connector
- 5975-00-295-9329 MPN AN3054-10Electrical Conduit Coupling Nut
- 5945-00-323-1917 MPN AN3337-1Electromagnetic Relay
- 5975-00-480-0114 MPN AN781-2Electrical Cable Nipple
- 5930-00-503-1700 MPN AN3022-1Toggle Switch
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-077-3880 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN7C21A | Aeronautical Standards Group |
Stock Check
- NS: 42
- NE: 10