NSN 5306-01-080-9188
Close Tolerance Hex Head Bolt
Between 1.216 inches and 1.246 inches fastener length, double hexagon head style, between 0.154 inches and 0.174 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number VS3085-4F15D for national stock number 5306010809188.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-080-9188.
-
MPN or Model
VS3085-4F15D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.268 inches and 0.318 inches -
Fastener Length
Between 1.216 inches and 1.246 inches -
Head Style
Double hexagon -
Head Height
Between 0.154 inches and 0.174 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.075 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
28 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.103 inches first hole and 1.133 inches first hole -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-682-5863 MPN NAS1190-04P8NSocket Head Cap Screw
- 5305-01-141-7195 MPN HT4020-5-9AYShoulder Screw
- 5305-01-141-7908 MPN HT4020-6-16AXShoulder Screw
- 5305-01-143-0610 MPN HT4020-5-22AXShoulder Screw
- 5305-01-280-6737 MPN ST3M733-3L24Close Tolerance Screw
- 5306-00-140-2042 MPN AIC220-4-16Shear Bolt
- 5306-00-582-5648 MPN 300005Machine Bolt
- 5306-00-819-7853 MPN 413838Machine Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-080-9188 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS3085-4F15D | Alcoa Global Fasteners, Inc. |
VS3085-4F15D | Alcoa Global Fasteners, Inc. |