NSN 5306-01-081-3075
Shouldered Rivet Ring Bolt
About this product
Between 0.190 inches and 0.192 inches eye inside diameter, 0.062 inches shoulder thickness, between 3.515 inches and 3.562 inches shank length, eye stock thickness: between 0.089 inches and 0.099 inches .
Manufacturer part number AN42B-C34A for national stock number 5306010813075.
Datasheet
-
Product description
Eye Bolt NSN 5306-01-081-3075.
-
MPN or Model
AN42B-C34A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.390 inches and 0.437 inches -
Eye Inside Diameter
Between 0.190 inches and 0.192 inches -
Shoulder Thickness
0.062 inches -
Shank Length
Between 3.515 inches and 3.562 inches -
Eye Stock Thickness
Between 0.089 inches and 0.099 inches -
Shoulder Diameter
0.437 inches -
Overall Length
Between 4.171 inches and 4.218 inches -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Center Of Eye To Shank End
Between 3.921 inches and 3.968 inches -
Eye Outside Width
0.437 inches -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unf
More from these suppliers
- 5935-01-559-5421 MPN MS17346R22C2PYElectrical Receptacle Connector
- 5940-01-660-0092 MPN NAS1063A2-536GTerminal Board Marker Strip
- 5305-00-003-6825 MPN NAS6002U28Machine Screw
- 5305-00-057-4913 MPN MS24671-29Socket Head Cap Screw
- 5305-00-058-9388 MPN MS51977-73Setscrew
- 5305-00-079-1751 MPN NAS1101C3-26Machine Screw
- 5305-00-097-4563 MPN NAS1100-04-8BMachine Screw
- 5305-00-119-7433 MPN NAS1635-08LL4Socket Head Cap Screw
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-01-081-3075 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN42B-C34A | National Aerospace Standards |
AN42B-C34A | Aeronautical Standards Group |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.