NSN 5306-01-081-3095
Coaxial Connector
Between 0.464 inches and 0.511 inches fastener length, double hexagon head style, between 0.154 inches and 0.174 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number AIC220-4A3 for national stock number 5306010813095.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-081-3095.
-
MPN or Model
AIC220-4A3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.266 inches and 0.333 inches -
Fastener Length
Between 0.464 inches and 0.511 inches -
Head Style
Double hexagon -
Head Height
Between 0.154 inches and 0.174 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
As 672 assn standard 11th treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-935-7513 MPN NAS110-00-3Machine Screw
- 5305-01-014-8453 MPN NAS1101E02-10Machine Screw
- 5305-01-135-1149 MPN ST3M455-5L5-1Close Tolerance Screw
- 5305-01-477-5614 MPN TX1026D6-26AClose Tolerance Screw
- 5305-01-478-2844 MPN TX1027C3-23AClose Tolerance Screw
- 5305-01-512-8295 MPN TX1027C5-20AClose Tolerance Screw
- 5305-01-512-8306 MPN TX1027D4-5AFClose Tolerance Screw
- 5305-01-512-8356 MPN TX1027C3-8AFClose Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-081-3095 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC220-4A3 | Sps Technologies, Llc |
VS2521-4F-3 | Alcoa Global Fasteners, Inc. |
EWSB22-4A-3 | Sps Technologies, Llc |
EWSB22-4A-3 | Sps Technologies, Llc |
C081-4-3 | Lockheed Martin Corporation |