NSN 5306-01-082-1370
Wheel Bolt
Between 0.658 inches and 0.693 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number 99-4755-03 for national stock number 5306010821370.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-082-1370.
-
MPN or Model
99-4755-03
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.508 inches and 0.543 inches -
Fastener Length
Between 0.658 inches and 0.693 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 43.0 rockwell c -
Material
Steel comp 4340 or steel comp 4140 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-5626 military specification 2nd material response -
Surface Treatment
Oxide film -
Surface Treatment Specification
Mil-c-13924, cl 1 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-01-169-5841 MPN 97-707Aircraft Hydraulic System Components Fixture
- 5950-01-338-7965 MPN 5907690Current Transformer
- 4820-01-374-9497 MPN 5909500-1Fluid Pressure Regulating Valve
- 5950-01-254-2859 MPN 21488-1Electrical Coil
- 5950-01-352-5735 MPN 935A764-2Current Transformer
- 4820-00-244-0414 MPN 19455-1Expansion Valve
- 5305-00-402-6255 MPN 99-4320-03Socket Head Cap Screw
- 5305-00-697-5754 MPN 02-11135Adjus Special Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-082-1370 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
99-4755-03 | Hamilton Sundstrand Corporation |