NSN 5306-01-084-0233
Wheel Bolt
Furnished with tab 2024-t4 al alloy; spacer 4130 steel,cadmium plated; washer cres.
Manufacturer part number AA2105-3-4A for national stock number 5306010840233.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-084-0233.
-
MPN or Model
AA2105-3-4A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.359 inches and 0.438 inches -
Fastener Length
Between 0.500 inches and 0.547 inches -
Head Style
Hexagon -
Head Height
Between 0.109 inches and 0.141 inches -
Width Between Flats
Between 0.365 inches and 0.377 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.1090 inches and 0.141 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 4140 or steel comp 8630 or steel comp 8735 or steel comp 4130 or steel comp 4037 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-043-5254 MPN 32-33205Aircraft Skin
- 5935-00-059-4495 MPN 5M806P24-61SWElectrical Plug Connector
- 1560-00-088-7955 MPN 32-12018-7Aircraft Skin
- 1560-00-089-4080 MPN 32-831562-10Tail Cone Duct
- 1680-00-261-6029 MPN 68A640007-1001Bell Crank
- 1560-00-280-0776 MPN 68A333002-2002Airframe Web
- 1560-00-351-6601 MPN 32-33253-127Airframe Clip
- 1560-00-361-7258 MPN 68-830053-295Air Heating System Duct Assembly
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-084-0233 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AA2105-3-4A | Aadox Mfg Co Inc |
SL107-3-4A | Sps Technologies, Llc |
3M107-3-4A | Boeing Company, The |