NSN 5306-01-085-3227
Coaxial Connector
Between 2.627 inches and 2.647 inches fastener length, double hexagon w/hole head style, between 0.290 inches and 0.310 inches head height, width between flats: between 0.302 inches and 0.322 inches .
Manufacturer part number MS21250-04034 for national stock number 5306010853227.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-085-3227.
-
MPN or Model
MS21250-04034
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.492 inches and 0.532 inches -
Fastener Length
Between 2.627 inches and 2.647 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.290 inches and 0.310 inches -
Width Between Flats
Between 0.302 inches and 0.322 inches -
Extended Washer Diameter
Between 0.428 inches and 0.438 inches -
Extended Washer Thickness
Between 0.059 inches and 0.079 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 2.115 inches and 2.135 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-507-2295 MPN LS15262V3-3Machine Screw
- 5305-01-412-7540 MPN GB510FG4-22Close Tolerance Screw
- 5305-01-512-8416 MPN 3M1170C3-9AFClose Tolerance Screw
- 5305-01-632-4002 MPN BACS12CK08-22Machine Screw
- 5306-00-205-3700 MPN ACB30NE6H18Close Tolerance Bolt
- 5306-01-045-4199 MPN VAL23608-4-3Shoulder Bolt
- 5306-01-046-1193 MPN VAL23033-4X10Shoulder Bolt
- 5306-01-047-0374 MPN ST3M729-8D48Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-085-3227 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21250-04034 | Valley-todeco, Inc. |
MS21250-04034 | Arconic Global Fasteners & Rings, |
MS21250-04034 | Alcoa Global Fasteners, Inc. |
MS21250-04034 | Textron Fastening Systems |
MS21250-04034 | Sps Technologies, Llc |
MS21250-04034 | Sps Technologies, Llc |
MS21250-04034 | All Manufacturers, Inc. |
MS21250-04034 | National Aerospace Standards |
MS21250-04034 | Huck International, Inc. |
MS21250-04034 | Military Standards |
MS21250-04034 | Chandler Craftsman Controls |
MS21250-04034 | Huck Intl Inc |
MS21250-04034 | Mercury Aerospace Fasteners Inc |
MS21250-04034 | Allen Mfg Co |