NSN 5306-01-086-6350
Coaxial Connector
Between 1.262 inches and 1.292 inches fastener length, dished hexagon head style, between 0.312 inches and 0.327 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number NAS1310-6 for national stock number 5306010866350.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-086-6350.
-
MPN or Model
NAS1310-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.877 inches and 0.927 inches -
Fastener Length
Between 1.262 inches and 1.292 inches -
Head Style
Dished hexagon -
Head Height
Between 0.312 inches and 0.327 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Thread Diameter
0.625 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Surface Finish
63.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1310 professional/industrial association standard
More from these suppliers
- 5940-01-348-4727 MPN NAS1063C7-1Terminal Board
- 5935-01-421-0966 MPN NAS1834-08-550Electrical Connector Insert
- 5305-00-005-0631 MPN NAS1509-22Close Tolerance Screw
- 5305-00-020-2826 MPN NAS1221-08-10PMachine Screw
- 5305-00-052-8250 MPN NAS1351-08-8PSocket Head Cap Screw
- 5305-00-059-8249 MPN MS35314-24Machine Screw
- 5305-00-068-0479 MPN MS35199-76Machine Screw
- 5305-00-116-1490 MPN NAS1100E06-4Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-086-6350 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1310-6 | National Aerospace Standards |