NSN 5306-01-086-8499
Shouldered Rivet Ring Bolt
About this product
Between 0.250 inches and 0.253 inches eye inside diameter, 0.094 inches shoulder thickness, between 0.828 inches and 0.875 inches shank length, eye stock thickness: between 0.183 inches and 0.193 inches .
Manufacturer part number AN44C6A for national stock number 5306010868499.
Datasheet
-
Product description
Eye Bolt NSN 5306-01-086-8499.
-
MPN or Model
AN44C6A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.500 inches and 0.579 inches -
Eye Inside Diameter
Between 0.250 inches and 0.253 inches -
Shoulder Thickness
0.094 inches -
Shank Length
Between 0.828 inches and 0.875 inches -
Eye Stock Thickness
Between 0.183 inches and 0.193 inches -
Shoulder Diameter
0.625 inches -
Overall Length
Between 1.718 inches and 1.765 inches -
Thread Diameter
0.312 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Center Of Eye To Shank End
Between 1.359 inches and 1.406 inches -
Eye Outside Width
0.625 inches -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-005-0656 MPN NAS1152V4Close Tolerance Screw
- 5305-00-008-5896 MPN NAS1102E5-10Machine Screw
- 5305-00-068-5287 MPN MS24693-C49Machine Screw
- 5305-00-070-2147 MPN NAS1191C04P10LMachine Screw
- 5305-00-145-1009 MPN NAS1100E06-12BMachine Screw
- 5305-00-151-2290 MPN NASM24693-48Machine Screw
- 5305-00-211-9354 MPN NAS1142E1Close Tolerance Screw
- 5305-00-338-3255 MPN NAS663V7Close Tolerance Screw
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-01-086-8499 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN44C6A | National Aerospace Standards |
26-343-1-3 | Atelier Industriel Del'aeronautique |
AN44C6A | Aeronautical Standards Group |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.