NSN 5306-01-088-8558
Close Tolerance Hex Head Bolt
Between 0.612 inches and 0.632 inches fastener length, double hexagon head style, between 0.085 inches and 0.105 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number 3021T34P02 for national stock number 5306010888558.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-088-8558.
-
MPN or Model
3021T34P02
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.382 inches -
Fastener Length
Between 0.612 inches and 0.632 inches -
Head Style
Double hexagon -
Head Height
Between 0.085 inches and 0.105 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1884 inches and 0.1889 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.230 inches and 0.250 inches -
Thready Qty Per Inch (tpi)
32 -
Surface Finish
32.0 microinches threads -
Material
Nickel -
Material Specification
C50tf13, fscm 99207 mfr ref single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-370-2608 MPN 21C7418P03BGrounding Terminal Strip
- 5306-01-534-6699 MPN J712P017AClose Tolerance Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-088-8558 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3021T34P02 | General Electric Company |
3021T34P02 | General Electric Company |
3021T34P02 | General Electric Company |
3021T34P02 | General Electric Company |
3021T34P02 | General Electric Company |
3021T34P02 | General Electric Company |
3021T34P02 | General Electric Company |
3021T34P02 | General Electric Company |