1-321-802-5889

NSN 5306-01-090-9610

Close Tolerance Hex Head Bolt

About this product

Between 2.041 inches and 2.088 inches fastener length, double hexagon head style, between 0.247 inches and 0.267 inches head height, width between flats: between 0.678 inches and 0.689 inches .

Manufacturer part number STSBG001A07D025 for national stock number 5306010909610.

Datasheet

  • Product description

    Close Tolerance Bolt NSN 5306-01-090-9610.

  • MPN or Model

    STSBG001A07D025

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • NMF (National Motor Freight)
    093486 - Bolts, Nuts Or Screws, NOI (sub 3)
  • Unit Weight (Est.)
    0.2 lb
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    Between 0.469 inches and 0.536 inches
  • Fastener Length
    Between 2.041 inches and 2.088 inches
  • Head Style
    Double hexagon
  • Head Height
    Between 0.247 inches and 0.267 inches
  • Width Between Flats
    Between 0.678 inches and 0.689 inches
  • Grip Diameter
    Between 0.4360 inches and 0.4370 inches
  • Shank Unthreaded Hole Diameter
    0.096 inches first hole and 0.116 inches first hole
  • Thread Diameter
    0.438 inches
  • Grip Length
    Between 1.552 inches and 1.572 inches
  • Thready Qty Per Inch (tpi)
    20
  • Min. Tensile Strength (psi)
    156000 pounds per square inch
  • Distance From Head Largest Bearing Surface To Shank Hole Center
    1.906 inches first hole and 1.958 inches first hole
  • Surface Finish
    32.0 microinches grip
  • Material
    Steel comp h11
  • Surface Treatment
    Cadmium
  • Thread Series Designator
    Unjf
More from these suppliers
Close Tolerance Bolt

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

Mechanic Bill explains Close Tolerance Hex Head Bolt

Pricing and Availability

Get a quote for 5306-01-090-9610 close tolerance bolt
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5306010909610

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
STSBG001A07D025 Lockheed Martin Corporation
LS5993-7D25 Lockheed Martin Corporation
STSBG001A07D025 Sps Technologies, Llc
STSBG001A07D025 Valley-todeco, Inc.
STSBG001A07D025 Sps Technologies, Llc
STSBG001A07D025 Sps Technologies, Llc
STSBG001A07D025 Alcoa Global Fasteners, Inc.
Stock Check
Availability of this NSN has not been updated recently. Submit the pricing and availbility form above to receive an up to date quote.