NSN 5306-01-092-0213
Coaxial Connector
Color white.
Manufacturer part number MS14157-06038 for national stock number 5306010920213.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-092-0213.
-
MPN or Model
MS14157-06038
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.708 inches and 0.758 inches -
Fastener Length
Between 3.093 inches and 3.123 inches -
Head Style
Spline extended washer -
Head Height
Between 0.248 inches and 0.288 inches -
Width Between Flats
Between 0.448 inches and 0.455 inches -
Extended Washer Diameter
Between 0.639 inches and 0.649 inches -
Extended Washer Thickness
Between 0.059 inches and 0.079 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Head Minor Diameter
Between 0.423 inches and 0.438 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 2.365 inches and 2.385 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Steel comp 8740 or steel comp 4340 -
Material Specification
Mil-s-6049 military specification 1st material response or mil-s-5000 military specification 2nd material response -
Surface Treatment
Paint top of head -
Surface Treatment Specification
Tt-e-489 no. 17875 federal specification single treatment response top of head -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-010-1571 MPN NAS1745-11Conductor Splice
- 5305-00-008-5846 MPN NAS1632C26Machine Screw
- 5305-00-025-4098 MPN NAS1153V32Close Tolerance Screw
- 5305-00-051-5907 MPN NAS333C6Close Tolerance Screw
- 5305-00-059-7042 MPN NAS587-17Close Tolerance Screw
- 5305-00-059-7408 MPN MS35202-25Machine Screw
- 5305-00-063-4568 MPN MS24630-48Tapping Screw
- 5305-00-080-0072 MPN NAS1625-6Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-092-0213 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS14157-06038 | National Aerospace Standards |
MS14157-06038 | Military Standards |