NSN 5306-01-092-0214
Coaxial Connector
Color white.
Manufacturer part number MS14157-07028 for national stock number 5306010920214.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-092-0214.
-
MPN or Model
MS14157-07028
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.803 inches and 0.853 inches -
Fastener Length
Between 2.563 inches and 2.593 inches -
Head Style
Spline extended washer -
Head Height
Between 0.291 inches and 0.331 inches -
Width Between Flats
Between 0.514 inches and 0.521 inches -
Extended Washer Diameter
Between 0.740 inches and 0.750 inches -
Extended Washer Thickness
Between 0.072 inches and 0.092 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Thread Diameter
0.438 inches -
Grip Length
Between 1.740 inches and 1.760 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Surface Finish
32.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 8740 or steel comp 4340 -
Material Specification
Mil-s-6049 military specification 1st material response or mil-s-5000 military specification 2nd material response -
Surface Treatment
Paint top of head -
Surface Treatment Specification
Tt-e-489 no. 17875 federal specification single treatment response top of head -
Thread Series Designator
Unjf
More from these suppliers
- 5930-00-539-7169 MPN NAS543-2Toggle Switch
- 5940-01-374-0802 MPN NAS1063B1-3Terminal Board Marker Strip
- 1560-01-423-0213 MPN NAS6708D38Aircraft Structural Component Support
- 5305-00-001-4713 MPN NAS1102C04-18Machine Screw
- 5305-00-020-2826 MPN NAS1221-08-10PMachine Screw
- 5305-00-052-6915 MPN MS24629-44Tapping Screw
- 5305-00-069-5584 MPN MS90725-100Hexagon Head Cap Screw
- 5305-00-114-1907 MPN NAS1352-10LE80PSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-092-0214 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS14157-07028 | National Aerospace Standards |
MS14157-07028 | Military Standards |