NSN 5306-01-093-4350
Close Tolerance Hex Head Bolt
Must have 12 point wrenching configuration.
Manufacturer part number 121933-4-13K for national stock number 5306010934350.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-093-4350.
-
MPN or Model
121933-4-13K
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093470 - Bolts/nuts I/s -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.358 inches -
Fastener Length
1.167 inches -
Head Style
Undercut hexagon -
Head Height
0.164 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.213 inches all holes -
Material
Stainless steel -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-067-7808 MPN SFH22D6A10Machine Screw
- 5305-00-445-8751 MPN 66117H4-5Close Tolerance Screw
- 5305-00-541-9033 MPN LS15234C3-1Close Tolerance Screw
- 5305-00-574-0225 MPN GB511DU3-4Machine Screw
- 5305-00-823-5807 MPN NAS1102-04-10Machine Screw
- 5305-00-844-2459 MPN NAS1204-34DClose Tolerance Screw
- 5305-00-915-2561 MPN NAS1124-4HClose Tolerance Screw
- 5305-00-956-2426 MPN NAS1203-36Close Tolerance Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-093-4350 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
121933-4-13K | Sps Technologies, Llc |
121933-4-13K | Sps Technologies, Llc |