NSN 5306-01-093-5102
Wheel Bolt
Between 1.668 inches and 1.688 inches fastener length, crowned hexagon head style, between 0.126 inches and 0.141 inches head height, width between flats: 0.488 inches .
Manufacturer part number SS27576-4-20 for national stock number 5306010935102.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-093-5102.
-
MPN or Model
SS27576-4-20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.418 inches and 0.422 inches -
Fastener Length
Between 1.668 inches and 1.688 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
0.488 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.250 inches and 1.266 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-065-7117 MPN S6122-85219-38Skid Strip
- 5940-00-082-4662 MPN SS7023-03Terminal Board
- 1560-00-247-0120 MPN S14-20-5104-7Aircraft Floor
- 1560-00-397-1555 MPN S14-30-5410Po Spinner Assembly
- 1560-00-512-4167 MPN S6120-65127-002Hinge Lock Housing
- 4820-00-520-6229 MPN S10-10-6450-2Safety Relief Valve
- 1560-00-562-4430 MPN S6107-35209-8Gear Box Parts Kit
- 1560-00-700-2560 MPN S6120-62277-012Latch Shaft Assy
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-093-5102 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SS27576-4-20 | Sikorsky Aircraft Corporation |