NSN 5306-01-093-5106
Wheel Bolt
Between 1.481 inches and 1.501 inches fastener length, crowned hexagon head style, between 0.126 inches and 0.141 inches head height, width between flats: 0.488 inches .
Manufacturer part number SS27576-4-17 for national stock number 5306010935106.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-093-5106.
-
MPN or Model
SS27576-4-17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.419 inches and 0.423 inches -
Fastener Length
Between 1.481 inches and 1.501 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
0.488 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.062 inches and 1.078 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-151-7984 MPN CA2630-0519Close Tolerance Screw
- 5305-00-232-9088 MPN CA1362Panel Screw Assembly
- 5305-00-840-5962 MPN 965336-1Externally Relieved Body Screw
- 5305-01-276-9198 MPN CA2193-4-18Close Tolerance Screw
- 5305-01-309-1522 MPN CA28080-08B-6HSPanel Screw Assembly
- 5305-01-329-9977 MPN CA21062-10-6-11Machine Screw
- 5305-01-488-6868 MPN CA2290-06-5-10Panel Screw Assembly
- 5306-00-003-4119 MPN CA4510-6-43Close Tolerance Bolt
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-093-5106 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SS27576-4-17 | Sikorsky Aircraft Corporation |
SS27576-4-17 | Arconic Global Fasteners & Rings, |
SS27576-4-17 | Fastener Technology Corp. |
SS27576-4-17 | Sps Technologies, Llc |
SS27576-4-17 | Sps Technologies, Llc |
SS27576-4-17 | Avibank Mfg., Inc. |