NSN 5306-01-093-5111
Wheel Bolt
Between 2.168 inches and 2.188 inches fastener length, crowned hexagon head style, between 0.126 inches and 0.141 inches head height, width between flats: 0.488 inches .
Manufacturer part number SS27576-4-28 for national stock number 5306010935111.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-093-5111.
-
MPN or Model
SS27576-4-28
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.418 inches and 0.422 inches -
Fastener Length
Between 2.168 inches and 2.188 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
0.488 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.750 inches and 1.766 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-151-8688 MPN CA23630-04-11Close Tolerance Screw
- 5305-01-088-1968 MPN CA21089-4-4HSSocket Head Cap Screw
- 5306-00-408-6864 MPN CA4510-4-19Close Tolerance Bolt
- 5306-01-359-6902 MPN CA21037-6-2HSInternal Wrenching Bolt
- 5305-00-151-9713 MPN 38030-4C12ZSocket Head Cap Screw
- 5305-00-152-0536 MPN SFH22-5A24Close Tolerance Screw
- 5305-00-238-7372 MPN 66904H4-17Shoulder Screw
- 5305-00-411-6536 MPN 66117H8-24Close Tolerance Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-093-5111 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SS27576-4-28 | Sikorsky Aircraft Corporation |
SS27576-4-28 | Sps Technologies, Llc |
SS27576-4-28 | Penn State Tool & Die Corporation |
SS27576-4-28 | Arconic Global Fasteners & Rings, |
SS27576-4-28 | Sps Technologies, Llc |
SS27576-4-28 | Avibank Mfg., Inc. |